Saturday, October 22, 2016

RC Electric Motor Info...

I was recently looking over some motors I had to try and determine the proper application, and remembered a chart that one of my sons put together many years ago, when we were selling a lot of motors online. While you might not find the exact motor in the list you are using, you'll find that the numbering system for most motors is fairly universal (motor shell diameter - length / # of turns in the motor winding). The chart shows approximate prop size range recommended as a starting point, and performance when compared to a conventional engine.

For the chart I archived with this data, go to this link: http://www.eastrc.org/electric-motor-ref.htm on my website. I hope this helps some of you!


Dave AMA119484
http://www.RCDave.net








Friday, October 21, 2016

Preflight checkout, Lucky13

I'm wrapping up this cleanup-checkout of my Lucky13 that has been parked about 2-1/2 years. Other than needing a RX battery, the bird seems fine and ready to go. Here's a quick clip of all of the servos in operation. Time to hand it up and move on to the next one. Getting the itch to burn holes in the sky!


Thursday, October 20, 2016

Another one pulled from the dust!

Here's another bird that's been unused and hanging in the ceiling for at least 2 years. It's called "Lucky 13" and was sold by East RC for several years (http://www.EastRC.org). It has a 64" wingspan, a flat bottom airfoil, and weighs about 5-1/2 lbs. I set this on up with a Hang-It RC XTRM 3520/06 motor, 12 x 6 e-prop, and fly it on a 4 cell 4000mah LiPO. It flies very scale-like on 4 cells. I've seen others with a similar setup and 5 cells, and it would fly straight up, out of sight.

I put a new 5 cell 3000mah NiMH receiver battery in it before it was stored (it needed the nose weight in my setup, anyway), and now it only cycles at about 1100 mah...so I guess it's time for a new flight battery. Oh well, it's still good for a flight or so, as long as i watch the charge closely. A new flight battery is on the "to get" list for this beast. Here's a few pics...

This is a 800rpm/volt motor, and swings a 12x6 like a .50ish sized glow motor. 


I added some color to the wing to help with visibility, using some scrap monokote I had laying around, and used the iron on about 225 degrees. 


It breaks down for transport pretty easily, and the wing also comes in half from it's internal round aluminum wing tube. 





A pic showing the tip of the wing & airfoil profile. 
 



Time to get back to work...maybe I'll have a day off soon to actually get out and fly this airplane! :-)

Dave AMA119484
http://www.RCDave.net



Wednesday, October 19, 2016

RC Transmitter Case from the 1980's...

This is a short blog about an early RC Transmitter Case I got from Gator RC back in the mid-1980's. There wasn't much to choose from back then, and many guys were having cloth pouches stitched up with padding to protect their radio transmitters. I bought a hard case from Gator RC and it's still in use today. Much to my surprise, I just discovered they're still in business and even on the web at http://www.gator-rc.com/ . Here's a few pics of my relic with an oldie-but-goldie Futaba 7UAF TX inside...








Dave AMA119484
http://www.RCDave.net




Tuesday, October 18, 2016

RX & TX Battery Maintenance on the Cheap!

Here's a tip on something I've been doing for 30+ years with great results. Most of us are guilty of charging our airplanes & transmitters for a day of flying, but never making out to the flying site. Our airplanes will sit around a few weeks until one day we have an unscheduled opportunity to go fly, only to find out that our gear isn't ready and waiting...This is especially common on systems where the batteries may be a little older and the batteries don't hold a charge quite like they used to, due to the internal leakage that comes with age of Nicd and NiMH batteries.

There are a number of trickle chargers and such out there to combat this problem, but I found a simple cure that keeps my gear topped off and ready to go very inexpensively. I use the standard chargers that came with my radio systems, in conjunction with a cheapie Christmas tree lighting timer. These timers are often found at Walmart for $3 or so, and can easily handle the very low current requirement of multiple chargers. Connect the chargers to the timer, set the timer to come on for maybe 30 minutes once or twice daily, and forget about it. It's that simple, and I've never had an issue as a result of doing this. Here I have several transmitters and chargers in maintenance mode...


Here's a closer look at the chargers in my workshop, ganged up on a timer. 

 

All of the airplanes in my ceiling mounted aircraft hangars are wired fr maintenance when hanging in storage. Notice the charger in the upper LH edge of this pic...
 

Another timer in the garage feeding some of the aircraft in another ceiling hangar. If I want to put a solid overnight charge on, all I have to do is flip the switch on the timer to the "manual on" mode. 
 

A Hangar 9 Twist and a Spoiler ARF hanging in storage while in maintenance mode. 


Another timer for a different batch of aircraft. It doesn't matter what the time on the timer is set to, nor what time I have it come on for 30 minutes... Very simple!


Dave AMA119484
http://www.RCDave.net






Wednesday, October 12, 2016

The Butteryfly is back together...

While trying to resurrect my fleet of old birds, I pulled down my old Butterfly. It was an ARF from Green Models, and I've had it about 7 years and have logged a lot of time on it during that time. It flys on a 2 cell 800mah lipo, and will get 30 minute flights on that setup, easily. The motor is a Hobby-Lobby AM400XTm and seems to be a perfect match for it. On days that are extremely calm with some lift, I'll fly it with a 400mah lipo to make it even lighter. With the 800mah pack, it weighs about 15oz.. With a 47" span and 300" of wind area, it's a real floater.





 



About 30 minutes into the flight at sunset last night, the rudder servo failed and it got into a light spin. I killed the power and it floated down and into the tall grass at the flying field with no damage. I replaced the servo when I got back home, and she's ready to go again. You can find these on the Maxford website at http://www.Maxfordusa.com .

Dave
http://www.RCDave.net


Monday, October 10, 2016

The Kadet is all finished!

It only took a few days in my spare time, but it's all finished and ready to fly. I can hardly wait to get this one back in the sky, it's always been a lot of fun and has become my favorite airplane to putz around with. Here's a couple of pics of the completed bird, and you can see some of the work that was done it it in the previous posts...








Dave
http://www.RCDave.net



Setting up mixing on the Kadet...

Folks often discount the Kadet as being a lazy trainer and Sunday flyer... I built this one from 3 wrecks that folks were tossing. It was rebuilt with a solid hardwood spar in a one-piece wing, a Saito 100 for power, converted to a tail dragger, and a much larger tank and battery was used. With it's barn-door ailerons and some mixing, this thing is a blast to fly. I mix flaperons, essentially raising the aileron neutral point as the elevators are pushed down, and visa versa. Huge 3D-style throws with lots of expo keep it a docile flyer with loads of potential as the sticks are tossed around.

This thing will hover with the 100 Saito, will roll into a knife-edge on takeoff and climb out in that attitude, will fly backwards with piles of flap action and low throttle. etc. Over the years of flying this airplane, it has become my favorite airplane to fly.

Here's a short video of the flaperon mixing in action, as well a conventional flap setup I have mixed in...